CLEVERSPA Monte Carlo, Инструкция по эксплуатации

Страница: 8 / 16

RF Wireless
Receiver
LED
Light Strip
How to connect
the LED lighting kit
B C
08
HOW TO INSTALL YOUR CLEVERSPA
®
LED LIGHTING
A
Mains Power
Converter
LIGHT KIT PARTS
LED
Light Strip
C
RF Wireless
Receiver
B
Mains Power
Converter
A
RF Remote Control
& CR2025 3V Battery
D
IMPORTANT! Note the placement of alignment notches
Correct installation of your LED lights is extremely
important. Failure to follow instructions carefully may
result in their early failure. Correct installation will ensure
they stay working every time you use your CleverSpa
®
.
Ensure lights are not installed too tightly, they must be
fitted loosely, with freedom to move between the retention
loops on the base of the hot tub to allow the lighting strip
to expand when filled with water.
Allow some excess strip across each gap, this will reduce
stress on the lighting.
Failure to do this can reduce the lifespan of your lighting.
Please see image below.
First
Lighting
Loop
Last
Lighting
Loop
Base of CleverSpa
®
Start/End lighting
equally spaced
Ensure lighting is not tight between
loops and LEDS face the base
FIT LED LIGHTS LOOSELY TO ALLOW THE CLEVERSPA
®
TO EXPAND WHEN FILLED.