CleverMic HDMI Series, Руководство пользователя

Страница: 63 / 63

menu.If video output from LAN,menu will not be displayed,menu will automatically exists 30s later,then it can be
controlled by remote controller.
5) Serial port can not work.
a, Check whether the camera serial device protocol,baud rate,address is consistent
b, Check whether the control cable is connected properly
c, Check whether the camera working mode is the normal operating mode (see Table 2.2 and Table 2.3)
6) Web pages can not log in
——a,Check whether the camera is showing normally.
b,Check whether the network cable is connected properly(Ethernet port yellow light flashes to indicate
normal network cable connection)
c,Check whether your computer is added the segment and the segment is consistent with the IP address of
the camera
d,Click "Start" and select "Run" and then type “cmd” in the computer;Click "OK" then turn on a DOS
command window to enter ping 192.168.5.163. Press the Enter key to appear message as follows: Description
network connection is normal
Copyright Notice:
All the contents of this manual and the copyright ownership belong to the company. Without the approval of the
Company,no one can imitate,copy,reproduce or translate arbitrarily.This manual does not have any form of
warranty,express or other imply. Specifications and information of this manual mentioned is just for informational
purposes,and the content will be updated at any time without notice.
Copyright can not be reproduced.