CleverMic HDMI Series, Руководство пользователя

Страница: 27 / 63

3. Application Instruction
3.1 Video Output
3.1.1 Power-On Initial Configuration
Connecting the power, camera will have initial configuration, R indicator light will be flashing. When the camera
return to the HOME position (middle position for P/T),and lens finish zoom in/out, the auto-testing is finished. IR
led will also stop flashing. If the preset 0 is set, camera will rotate to the 0 preset position after initial
configuration.
3.1.2 Video Output
Connect to the video output cable: the user select the output mode according to the machine model.
Figure 1.4.1 is for your reference (output interface introduction for each product)
1) network output: connect this product and your computer through network cable, then open the browser,
enter the camera IP address (factory default 192.168.5.163) in the address bar, then to the login page and
input a user name and password (factory default are “admin”) ,Finally enter the preview page, and the
image comes out.
(Note: If you forget your user name, password, IP address, you can manually restore the default by the
remote controller key combination * #)
2) SDI output: Connect the monitor with the corresponding video output interface,then the monitor output
image.
3)USB3.0 output: Connect this product with computer USB3.0 interface (blue),open the Device Manager to
see whether there is an image device and whether the Universal Serial Bus controllers recognize USB3.0 device.
After properly identified, open the software, choose the image device and then it will output image.
4)USB3.0 compatible with USB2.0 output: Connect this product with computer USB2.0 interface (black),open
the Device Manager to see whether there is an image device and whether the Universal Serial Bus controllers
recognize USB3.0 device. After properly identified, open the software, choose the image device and then it will
output image.
5)USB2.0 output: Connect this product with computer USB2.0 interface (blue),open the Device Manager to
see whether there is an image device and whether the Universal Serial Bus controllers recognize USB2.0 device.
After properly identified, open the software, choose the image device and then it will output image.
6) HDBaseT output: Connect camera, HDBaseT signal receiver and the video display via LAN and video cable
with correct way. The device finish self-checking then output image.