NPM User Manual
25
ding device series, check the setting success or not through reading the device status of
device series number, check the setting success or not through reading the device
ber
e the new added device.
e original default values please refer to the 4
th
page of IE browser, the method
tly with network cable, namely network direct connection, rotate "OUTLET
UTLET NO.2 for 30 seconds (the interval of RUN light is 2 seconds), the digital tube will
D
ect after the network disconnected.
hrough "Device Configuration" interface, make sure the device series number
ingle device
device to be Master, others to be Slaves;
ord can be used only once,
t be affected when restore to the original factory setting.
nd function well;
e sure the pop and smtp server was filled in correctly and accordant with server of e-mail sender, the
and add the correspon
"STATUS" interface
C. Log on to TELNET command line console access, command line of "Add Device" can be used to daisy-chain
devices and add corresponding
status of "STATUS" interface.
Note:
A. The daisy-chain device hold the unique hardware series num
B. The name can not be repeat when nam
IV. Restore the network configuration
Restore the network configuration of hardware, restore IP address, sub-net mask, default gateway, DNS setting, SSH,
Telnet, HTTP to factory settings, for th
of restoring by network are as below:
A. Connected the device and PC direc
NO.1" knob on the front panel to “U”
B. Set up the device as Mater (the Slaves can not be restored)
C. Press knob of "O
display the RES IP;
. PC interface will automatically conn
4. Frequently Asked Questions
1.
Q: User can not monitor the device information after logging on to the administrator interface.
A: 1, Check the device series number t
is exactly the same with the hardware;
2, Check whether the hardware device is the Master or not, the Slaves can not be monitored when s
connected to network, multiple devices daisy-chain, set up one
2.
Q: Forget the login IP address
、
user name or password?
A: Press the knob of "OUTLET NO.2 for 30 seconds to restore it to factory setting, when restore complete the IP will
be: 192.168.1.163; User name is clever; password is clever, these user name and passw
other user administration will no
3. Q: E-mail delivery failure?
A: 1. Check and make sure the network are connected a
2. Check whether the DNS setting is successful or not;
3. Check and mak
smtp port is right
