Clever NPM 3100, Руководство пользователя

Страница: 24 / 26

NPM User Manual
24
n, TELNET configuration, SNMP configuration, voice alarm setting, e-mail alarm
lid after system reboot
automatically when
em, the IE browser interface and the TELNET interface will restart with the system.
d password. Terminal user can input the command in the
and line console is the same with SSH command line console, details please
r .
ices at one
devices can be connected at most to one master, please see details as below:
veral Slaves, M/S indicator on is the Master while off is Slave, make sure the device
Press RESET button for 12 seconds (the interval of RUN light is 2 seconds), setting success when
Press RESET button for 6 seconds (the interval of RUN light is 2 seconds), setting success when M/S
f NPM Address No., check the setting success or not through reading the device status of
9)
RESET
"RESET" command line can be used to restore factory seting, e.g device name, output port name, HTTP
configuration, SSH configuratio
setting and user management.
Note:
it will be va
10)
RESTART
"RESTART" command line can be used to restart the system, the SSH interface will be closed
restart syst
11)
QUIT
"QUIT" to close the SSH system.
2.4.
TELNET command line console access
The application of Telnet provides the user with the ability of remotely login and controlling conveniently,
start the conversation by inputting the user name an
telnet program to control and get better response,
The operation method of comm
efer to the SSH instruction
3. Device Daisy-chain
The device support daisy-chain (see hardware user manual), user can monitor and control multiple dev
time conveniently, and 10
3.1. Hardware setting
Firstly set up one Master and se
are connected in the right way.
Master setting:
M/S light on.
Slave setting:
light off.
3.2. Software setting
There are three ways to set the daisy-chain by software, please details as below:
A. Log on to IE(Internet Explorer) browser access interface, open the "Device Configuration" and input the device
series number in the frame o
"Device Control" interface
B. Log on to SSH command line console access, command line of "Add Device" can be used to daisy-chain device