Installation of the Unit:
4
1) Fig 1 shows the Projector mounting
bracket with the projector attached. The
unit needs to be attached to one of the
arms at the front of the projector.
Fig 1
Fig 2
Fig 3
2) Attach the ceiling mount bar to one
of the arms of the projector mounting
bracket using the M6 nut and screw as in
fig 2, fig 3. (Metal bar to go between the
screw and nut).
3) Hold the interactive unit under the
front of the ceiling mount bar and attach
carefully with the screw. (Fig. 4, 5)
Fig 4
Fig 5
Fig 6
4) Plug the USB cable in to the side of
unit. (Fig. 6)
5) Adjust the interactive unit so that the
module is directly above the projector’s
lens. Then align the interactive unit’s
lens and the projector’s lens. Once this
has been done correctly, tighten the
screw to secure the interactive unit in
place.
7) Place the Software CD-ROM into
the CD drive and copy the “LightPen II”
folder onto your PC. Open the “LightPen
II.exe” software. The LightPen icon
should appear in the task bar. Left click
on this and select “Preview Window”. A
previewing window should now appear.
6) Slide open the lens cover on the
interactive unit. (Fig 7 & 8)
Fig 7
Fig 8
