Cleveland SGL-X, Руководство по ремонту

Страница: 2 / 24

OPERATING CONTROLS
AND INDICATORS
For your better understanding and confidence, the following explanation of the control system used on
these skillets is offered.
Item No. Description Function
Gas Control Valve 13
(Skillet Bottom Dwg.)
Controls main gas supply to the skillet.
Pilot Light When illuminated, the lower pilot light indicates
(Electrical electrical power is on to the skillet and the upper pilot
2
Components Dwg.) light indicates the main gas burners are on.
Thermostat Control Knob This control knob allows the operator to select various
(Electrical
4
Components Dwg.)
heat increments for operating the skillet
On/Off Toggle Switch
(Electrical
7
Components Dwg.)
Controls electrical power to the skillet
Timer Control Knob This knob controls the bell timer and allows the
(Electrical operator to select a time interval after which a bell
9
Components Dwg.) will sound.
Tilt Switch When activated this switch will raise or lower the
(Electrical
15
Components Dwg.)
skillet pan.
Hand Wheel
(Hydraulic Lift
13, 17
Mechanism Dwg.)
Turn counter-clockwise to raise skillet pan.
Push Button
(Hydraulic Lift 12, 16
Mechanism Dwg.)
Press to allow skillet pan to lower.
Micro Switch Protective switch to prevent burners from igniting
(Electric Jack
10
Assembly Dwg.)
white skillet pan is in a raised position.
Micro Switch Protective switch to prevent burners from igniting
(Hydraulic Jack
27
Assembly Dwg.)
write skillet pan is in a raised position.
1