Cleveland Convotherm PC-Control Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 24

Cleveland Convotherm PC-Control Скачать руководство пользователя страница 4

Operating Instructions

2. CONVOTHERM PC-HACCP

page

1

10 July 2006

CONVOTHERM PC-HACCP

2.1 Installing, Setting Up and Starting the Software

1. Install the CONVOTHERM PC-HACCP software and set it up to suit your hardware.

2. This software can manage two "networks" of one Combi each as a stand-alone system

or up to 31 Combis each as a network installation.

3. For each of the networks used, the interface (COM) port must be selected.

4. In the selected (see below) network, each Combi used for recording HACCP data or for

transferring Programs must be logged in.

2.1.1 Installing CONVOTHERM HACCP Software on a PC

1. Start Windows 95 or Windows NT on the PC.

2. End all other programs before installing the Convotherm software.

3. Insert the installation CD-ROM into the CD-ROM drive.

4. Use Windows Explorer to navigate to the CD-ROM drive.

5. Open the SETUP.EXE installation program.

6. Follow the instructions in the installation program.

•

The required directories are created automatically.

7. When installation is complete, start the program in Explorer by clicking on

CONVOTHERM-HACCP.EXE in the selected directory.

•

If there is an error beep when the program starts, correct the network interface,

and see 2.1.2.

8. In the window

Responsible chef,

in the field

new,

enter the name of the person

responsible for the HACCP documentation.

9. Click

add

.

10. Click

OK

to save or Cancel to quit without saving.

«
...
2
3
4
5
6
...
»

Содержание Convotherm PC-Control

























Отзывы:

Нет отзывов