ZigBee Motion Detector – User Manual
UM_ZMOVE_20090731_001_04_00
CLEODE Page 15 sur 18
III.3 R
ESTART OF THE ASSOCIATION PHASE
If the
ZMOVE is not associated, the user can ask him at any time to join a network.
For this, the user has to press during 3
seconds on the button.
If the
ZMOVE was not associated it begins
flashing quickly during 20 seconds. The
ZMOVE looks for a coordinator during this
blinking.
If the association is success, the light of the
ZMOVE flashing during 2 seconds and turn
off
.
If the light of the
ZMOVE does not flash after pressing on the button during 3 seconds, this
means that he is already associated in a network.
III.4 R
ESET
If need, the user can reset the
ZMOVE.
For this, he has to press on the button during
5 seconds.
When the ZMOVE reset, the LED flashes
twice and turn off.
