ZigBee Motion Detector – User Manual
UM_ZMOVE_20090731_001_04_00
CLEODE Page 14 sur 18
Change batteries by respecting well the
indicated polarity.
Put back the lid on the ZMOVE by making
it slide until it is to clip.
Once the ZMOVE closed, you can put back it in position.
III.2 S
TARTING UP
ZMOVE
In the switched on of the object, it tries to
join during about seconds and flashes
twice.
If a coordinator is present and what it
authorizes the ZMOVE to join the
network, the light of the ZMOVE flashing
during 2 seconds then turn off.
In the cases where the association is not possible, the object is going to put itself in sleep and
to try automatically to join at the end of 15 minutes. This time will increase twofold in every
new failure of the association.
