Cleode ZGAS Скачать руководство пользователя страница 2

 

User Manual : ZGAS 

CLEODE 

page 

2

 

sur 

21

 

 

Warranty 

 

The  device  supplied  to  the  buyer  and/or  the  recipient  is  guaranteed  by 

CLEODE

  against 

any  malfunctions  originating  from  a  design  and/or  manufacturing  flaw,  for  a  period  of 
twelve  (12)  months  following  delivery.  The  buyer  and/or  recipient  is  (are)  responsible 
for  proving  the  existence  of  the  said  defects  or  flaws.  This  warranty  is  applicable  in 
accordance  with  articles  1641  to  1648  of  the  French  Civil  Code  and  in  compliance  with 
the  French  statutory  warranty.  The  warranty  covers  the  replacement  free  of  charge  of 
devices  and  parts  affected  by  a  design  and/or  manufacturing  flaw  excluding  conspicuous 
defects in  the device that are covered by the buyer  and/or  the recipient 

In  order  to  invoke  the  warranty,  the  buyer  must  immediately  send  written  notice  to 

CLEODE

  of  the  flaws  that  it  attributes  to  the  device.  It  must  enable 

CLEODE

 to have 

access  to  the  device  to  observe  these  defects  and  repair  them. The warranty provided by 

CLEODE

  is  strictly  limited  to  the  equipment  provided  and  shall  only  have  for  effect  the 

replacement  or  repair,  at 

CLEODE

’s  expense,  on  its  own  premises,  of  all  devices  or 

parts  that  are  not  functioning  as  a result of defects or flaws. 

CLEODE

 reserves the right 

to modify  the devices  in  order to comply  with  the warranty. 

The  warranty  does  not  apply  to  replacement  or  repairs  that  may  result  from normal wear 
and  tear  of  devices,  systems  or  products,  damage  or  accidents  resulting  from  negligence, 
failure  to supervise  or maintain,  or incorrect  use of the devices,  systems  and/or  products.  

The  maintenance  service  is  provided  by 

CLEODE

  with  all  reasonable  care  possible  and 

in  compliance  with  the current state of the arts. 

The  exchange  of  parts  or  repairs  performed  under  the  warranty  cannot  result  in 
extending  the  length  of  the  warranty.  In  no  event  can  the  unavailability  of  the  device due 
to  servicing  give  rise  to  compensation  for  any  reason  whatsoever.  The  seller  is  released 
from  all  obligations  relating  to  the  warranty  if  the  product  or  device  has  been  modified 
without  prior  written  consent,  or  if  original  parts  have  been  replaced  by  parts  which  it 
has  not  manufactured  without  prior  consent.  If  unforeseen  damage  is  caused  by  the 
device,  it  is  expressly  agreed  that  the  seller  can  only  be  liable  for  the  reimbursement  of 
monies  received  for  the  purchase  of  the  device  if  it  has  been  destroyed.  Under  no 
circumstances  can  the  seller  be  held  liable  for  indirect  or  contingent  damage.  The  seller 
is  released  from  any  liability  and  the  buyer  waives  any  rights  against  it  if  an  accident  or 
direct  or  indirect  damage  is  caused  to  the  buyer  following  a  defect,  incorrect  usage, 
incorrect  maintenance  or normal  wear of the device  sold. 

 

Содержание ZGAS






















Отзывы: