Cleode ZGAS, Руководство пользователя

Страница: 14 / 21

User Manual : ZGAS
CLEODE
page 14 sur 21
III.3 Maintenance
III.3.1 Check functionality
It is recommended to check the functionality of the sensor once a month, press the button once, the sensor
beeps and the LED turns on and turns off.
III.3.2 Maintenance
It is recommended to clean the sensor regularly to avoid obstruction of sensor:

Cleaned the sensor surface with a soft cloth.

Use a vacuum cleaner with a soft brush to remove dust that may accumulate at the openings of the case.
III.4 Pairing the product for the first time
To pair the ZGas in a ZigBee® network, proceed as follows:
1) Allow the addition of ZigBee® object in your
network (see the manual of your ZigBee®
coordinator).
2) When the power is turned on, the ZGas trying
to join a network during few seconds and blink
twice.
3) If a coordinator is present and allows the ZGas
to join, the red light turns on for 2 seconds and
then turns off.
If the association isn’t possible, the ZGas will sleep, it will automatically attempt to join a
network after 15 minutes. This time will be doubled for each new association failure.