Installation Guide / SolarRoof™ SADL Bracket A1
8
Code-Compliant Planning and Installation Guide V1.0 - Complying with AS/NZS1170.2-2011 AMDT 2-2016
3. Rail Installation
3.1 To connect several rails, slide half of the splice into the rear side of the rail, and fasten the first M8 bolt. Slide
the next rail into the splice and tighten the second M8 bolt. Splice provides the electrical connection between the
2 rails through the pressure bolts. This eliminates the need of using 2 earthing lugs.
Required torque is 10 ~12 N•m.
3.2 Install the Z module into the side channel of ECO Rail as shown in the figure on the right.
- Installation Instructions -
Clearance
106~121mm
Clearance
126~149mm
4. PV Module Installation
4.1 Please refer to the
PV-ezRack Grounding System Installation Guide
for PV modules clamps and grounding lugs
installations.
4.2 The installers must ensure panel clamps are installed flush mounted to the panel frame and apply the correct
torque value of the clamp fastener as shown in this guide.
