9 / 12
No. 999-1009, Min’an Avenue, Xiang’an 01/10 Duerdin ,
Xiamen China 361006 Clayton VIC 3168
Tel: +86-592-5781288 Tel: +61-3-90176688
Fax: +86-592-5782298 Fax: +61-3-90176668
Email:
Email:
4.3. Rectangular Tube-Master & Adjustable Tube Installation
4.3.1 Attach the Rectangular Tube-
Master to the Steel Cap Assembly with
the M20*160 hex head bolt, washers,
spring washer and nut. Refer to
①
.
4.3.2 Attach the Adjustable Tube to the
Rectangular Tube-Master with the
M20*160 hex head bolt, washers,
spring washer and nut. Refer to
②
..
4.3.3 Connect the Adjustable Tube to
the Steel Cap with the M20x160 hex
head bolt, washer, spring washer, and
nut.
You can set the required tilt angle (10-
60º) through the different holes on the
Adjustable Tube. Refer to
③
and to the
next image.
4.3.4 Adjust the Steel Cap along the
circumference, make the Rectangular
Tube-Master parallel to N-S direction.
Fasten all bolts, after check the fitness
between
the corrugated surface washer
and the waves on the Steel Cap.
Recommended Torque:
M20: 210~220Nm
Note:
Recommend to set the Rectangular
Tube-Master in the tilt angle 10° to
make the follow up assembly
process easier. When the
assembly is complete, then the
angle can be set to the designed
position.
At the place refer to
②
,if there exist
any clearance between the
○
1
○
2
○
3
