Unit 1, 10 Duerdin St, Clayton VIC 3168, Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
1
page
of 15
Installation Guide_PostMount 2-A for XL Panels_AU_V1.1 (January 2021)
Introduction
1. Introduction
Clenergy PV-ezRack
®
PostMount 2-A for XL
Panels (up to 2100 x 1100 mm) is a ground
mounting system suitable for large scale
commercial and utility scale installations. PV-
ezRack
®
PostMount 2-A for XL Panels has
been developed to fit any PV module in the
outdoors and uneven ground areas. PV-
ezRack
®
PostMount 2-A for XL Panels have
good compatibility for the different region via
the angle adjustment (10°~60°). Using high
quality engineered components PostMount 2-A
for XL Panels saves developers and installers,
time and money when delivering large scale
projects.
Please review this manual thoroughly before
installing PostMount 2-A for XL Panels. This
manual provides the following contents:
(1) Installation planning;
(2) Installation instructions.
The PV-ezRack
®
PostMount 2-A for XL Panels
parts, when installed in accordance with this
guide, will be structurally adequate and meet
the AS/NZS1170.2:2011 Admt 4-2016 standard.
During installation, and especially when working
on the ground, please comply with the appropriate
occupational health and safety regulations. Please
also pay attention to other relevant regulations in
your local region. Please check that you are using
the latest version of the installation manual by
contacting Clenergy via email on www.clenergy.
com.cn.or contacting your local distributor.
The installer is solely responsible for:
• Complying with all applicable local or national
building codes, including any updates that may
supersede this manual;
• Ensuring that PV-ezRack
®
and other products
are appropriate for the particular installation and
the installation environment;
• Using only PV-ezRack
®
parts and installer
supplied parts as specified by PV-ezRack
®
project plan (substitution of parts may void the
warranty and invalidate the letter of certification);
• Recycling: Recycle: according to the local
relative statute;
• Ensuring that there are no less than two
professionals working on panel installation;
• Ensuring the installation of related electrical
equipment is performed by licenced
electricians;
• Ensuring safe installation of all electrical aspects
of the PV array including providing adequate
earth bonding of the PV array and PV-ezRack
®
PostMount components as required in AS/NZS
5033-2014 ADMT 2 2-2018.
Introduction
Tools & Components
System Overview
Installation Instruction
Certification Letter
Warranty
01
02
03
06
12
13
List of Contents
