5 / 10
Clenergy China
Tel86 592 311 0088
999-1009 Min'an Rd, Huoju Hi-tech Ind. Dev. Zone
Fac86 592 599 5028
Xiang'an District 361101, Xiamen, Fujian, China
4. Installation Instructions
4.1.1 According to the
installation plan, fix the front
leg and rear leg on the
ballast bar, check the size
and position, and then
tighten the bolts, as shown
in Fig. 1.
Note:
- The distance between the
front/rear leg end and the
ballast bar end shall accord
with
the
dimension
indicated on the project
drawings;
- Slide the front and rear leg
respectively
in
to
the
mounting
slots
on
the
ballast bar;
- Put the ballast bar upright,
so that it would be easier to
fix the front and rear legs.
Recommended
tightening
torque
for
M8
bolt:
16-20N·m
4.1.2 According to the
installation plan, mark out
the installation position and
place the front and rear legs
accordingly, as shown in
Fig. 2.
Fig. 1
Fig. 2
