STARTING AND USE INSTRUCTIONS
UBF 28 NEW
Rev. 00
27/04/09
Pag. 26/36
4.7.5 RECOVERY TANK EMPTYING (AUTOMATIC VERSION)
Please follow the following instructions in order to empty the recovery tank:
¾
turn the key on the control board and switch the motor on, if the machine is a version with
endothermic motor.
¾
Press the proper key on the control board in order to lift up the recovery tank (see par. 4.6.1 to
check the right key to use);
¾
Once reached the required dumping height (particular 1 pict. 4.12) release the key;
¾
Move the machine to reach the right position above the discharging area (particular 2 pict.
4.12);
¾
When the machine is in the right position, pull the handle to discharge the rubbish (particolar 3
picture 4.12)
¾
Follow the opposite instructions to bring the machine at the original status.
1 2 3
PICTURE N° 4.12
