STARTING AND USE INSTRUCTIONS
UBF 28 NEW
Rev. 00
27/04/09
Pag. 15/36
TURNOVER
This kind of ranger can occur:
- during the normal operating of the machine when you exceed sloping limits as specified in the
manual and you use the machine to clean disconnected surfaces or with holes and high
depressions.
Do not use the machine to wash sloping surfaces higher than 10% or surfaces with
holes or depressions which might compromise the stability of the machine.
FIORENTINI is not responsible for accidents occurred to people or things provoked by a
wrong use of the machine, i.e. using the machine on surfaces which can compromise its
stability.
The purchaser must stick proper labels on the machine to show the operator its right use.
3.8. SAFETY SIGNALS
Among safety signals there are:
DANGERS
Dangers’ signals are triangular with black
pictures on a yellow background
PROHIBITIONS
Prohibitions’ signals are round with black
pictures and a red stripe
What is it?
Crashing danger: it can be due to parts in movement of the machine.
What to do
During the installation or the maintenance make sure that the ignition
key is not in the dashboard before removing the mobile protections.
What is it?
This signal forbids to remove the protection of pieces in movement.
What to do
During the installation or the maintenance make sure that the ignition
key is not in the dashboard before removing the mobile protections.
While the machine is operating make sure that all covers are well
fixed.
