Cleco MA3S358M, Инструкция по эксплуатации

Страница: 7 / 36

Page 7
PL70-1046EN
07/08/2013
Cleco
®
Safety
1.2 Basic requirements for safe working practices
All personnel involved with the installation, operation or maintenance of these tools must read and
understand all safety instructions contained in this manual. Failure to comply with these instructions
could result in serious injury or property damage.
These safety instructions are not intended to be all inclusive. Study and comply with all applicable
National, State and Local regulations.
---------------------------------------------------------------------------------------------------------------------------------------
Work Area:
Ú
Ensure there is enough space in the work area.
Ú
Keep the work area clean.
Ú
Keep the work area well ventilated.
Personnel Safety:
Ú
Inspect the air supply hoses and fittings. Do not use damaged, frayed or deteriorated hoses.
Ú
Make sure the air supply hose is securely attached to the tool.
Ú
Install adequate guards for all moving parts of the power motor or it’s application.
Safety working with and around power motors:
Ú
Make sure the motor is securely mounted to the application.
Ú
Make sure the output spindle is fully engaged with the application.
Ú
Disconnect the air supply before servicing the motor
---------------------------------------------------------------------------------------------------------------------------------------
1.3 Operator training
All personnel must be properly trained before operating the MA3 tools. The MA3 tools are to be repaired
by fully trained personnel only.
1.4 Personal protective equipment
When working
Wear eye protection to protect against flying metal splinters. •
Wear hearing protection •
Danger of injury by being caught by moving equipment.
Wear a hairnet •
Do not wear close fitting clothing •
Do not wear jewelry •