Cleco 936491PT, Инструкция по эксплуатации, Страница: 19 / 76

2069b_1_5_en_bedingt.fm, 04.08.2015
P2069BA/INT 2015-06 19
Product description
2
EN
2 Product description
2.1 General description
• Automatic identification of connected battery.
• Automatic identification of a charged battery guarantees optimum charging results.
• Automatic identification of a defective battery.
• The recharging phase guarantees maximum run time of the battery.
• Charge status display
• Overcharge protection
• Wide-range input make worldwide use possible.
• Voltage monitor prevents deep discharging and battery short-circuits.
2.2 LED display
Fig. 2-1
LED Operating status Result Symbol
Off No mains supply
Lights up green Power supply connected
Off No battery contact
Flashing green at
0.5 Hz Battery charging, charge state < 80%
Flashing green at 1 Hz Battery charging, charge state > 80%
Lights up green Battery is charged
Lights up red Temperature in battery too high
Flashing red at 2 Hz Battery fault:
•
Short circuit
• Faulty cell
• Faulty electronics