Cleco 936491PT, Инструкция по эксплуатации, Страница: 18 / 76

18 P2069BA/INT 2015-06
2069b_1_5_en_bedingt.fm, 04.08.2015
Safety
1
EN
1.2 Symbols on the product
 Make sure you are familiar with the meanings before you start using the device.
1.3 Basic requirements for safe working practices
1.4 Designated use
• The charger is intended exclusively for charging the following Apex Tool Group lithium ion batteries:
• Order no. 936400PT
Order no. 935377.
1.5 Items supplied
Check shipment for transit damage and ensure that all items have been supplied:
1.6 Transport
Transport and store the charger in the original packaging. The packing is recyclable.
Read the Instruction Manual
before initial operation. Always return used electrical equipment for
recycling.
Slow-blow fuse Operation only indoors or in closed prem-
ises
CAUTION!
Electrical safety

Do not operate the charger if the housing, power cable or plug are damaged.

Do not use batteries which have been damaged or modified in any way. Batteries which have been
damaged or modified may respond unpredictably, causing fire, explosion or injury.

Do not open the charger.

Do not modify the charger structurally.

Operate the charger in dry, enclosed rooms only.

Protect the charger from moisture and rain.

Never operate the charger under unsuitable ambient conditions (i.e. where combustible gases, solvents,
dust, vapors or moisture is present).
Workstation

Ensure that there is enough space at the workstation.

Keep the work area clean and dry.
1 Battery charger 1 GB power cable
1 EU power cable 1 Instruction Manual
1 NA power cable