Cleco 7PTHH, Инструкция по эксплуатации

Страница: 16 / 42

16 P2119BA/EN 2014-06
2123c_Wartung_en_bedingt.fm, 03.07.2014
Maintenance
6
6.1.1 Calculating a customer-specific maintenance plan
A service interval W(1,2,3) depends on the following factors:
T2 , S and VS are variable factors and can differ depending on the specific application.
Example for service interval W2:
After 500,000 rundowns (V),
a specific rundown time of 1.8 seconds (T1)
with an actual fastening time of 3 seconds (soft joint) and
3 completed shifts per day and 750 rundowns per shift:
You have to carry out the maintenance measures marked W2 after an operating time of 200 days.
6.2 Fill reserve oil
If X = 0 (see picture 2 ), the reserve oil is exhausted and must be refilled to guarantee a controlled process.
Factor Value assumed in
6.1, "Maintenance plan" Description
V V1 = 100,000
V2 = 500,000
V3 = 1,000,000 Number of rundowns after which a maintenance measure is pre-
scribed by Apex Tool Group.
T1 1.8 seconds Specific rundown time, measured in life and endurance tests.
T2 2 seconds Actual rundown time, depending on the hardness of the joint.
S 1; 2; 3 Number of shifts per day.
VS 750 Number of rundowns per shift.
1
 Remove pulse unit.
2
 Remove set bolt and ball.
W 1 2 3
   
V T1

T2 S

VS

------------------------------ =
W2
500000 1 8
 
2 3

750

--------------------------------- =
200T
age =
<103>
<102>
X = 0