Cleco 7PHH, Инструкция по эксплуатации

Страница: 9 / 38

1994b_1_5_en-bedingt.fm, 12.06.2014
P1990BA/EN 2014-06 9
Before initial operation
4
Oils according to DIN 51524 / ISO 3498
4.2 Change air inlet: top / bottom (only on 7PHHA)
When delivered, the air inlet is at the BOTTOM and sealed with a screw plug. To change the air supply from
top to bottom:
 Remove the air strainer from the air inlet at the TOP (do not discard), see 8.2 Pistol grip 7PHHA…,
page 28, Detail
X .
 Remove screw plug from BOTTOM. When doing this, counterhold with wrench (WAF 17).

Seal the air inlet at TOP with screw plug in accordance with specifications.
4.3 Connect the tool
 Connect the tool to the compressed air line.
Maximum screwing-in torque = 40 Nm. Reaction torque at flat end. Counterhold with wrench (WAF 17).
 Activate compressed air: 620 kPa.
4.3.1 Testing
4.4 Setting up the tool
The tool must be configured for the desired rundown.
Order
no.
Packaging
unit
Liter
Name ARAL BP elf ESSO INA Mobil Klüber SHELL
933090 2 HL32
Aralub
EE 100
Energol
HL 32
Polyelis 32
Olna 32
Nuto
H 32 Hydraol
32A
D.T.E.Oil Light
Vactra Oil Light
Crukolan 32
Molina 32
Molina 22
CAUTION!
The air hose can come off by itself and whip around uncontrollably.
 Shut off the compressed air before making the connection.
 Fully open exhaust air throttle anti-
clockwise.
 Check speed at output drive:
>6000 rpm