Cleco 19BPA, Руководство по обслуживанию

Страница: 12 / 44

Page 12
PL12-1013EN
10/16/2014
Cleco
®
Before Initial Operation
5 Before initial operation
5.1 Ambient conditions
Ambient temperature: 41°F (5°C) to a maximum of 104°F (40°C)
Acceptable relative humidity: 25% to 90%, non-condensing
5.2 Air supply
To attain consistent results, maintain a constant working pressure using a suitable air line unit consisting
of a filter, regulator and lubricator.
Ú
The inside diameter of the air hose must be free of residue, clean if necessary.
Ú
Spray a few drops of light air tool oil into the air inlet adapter.
Ú
Adjust the lubricator to a minimum setting to reduce the amount of excess oil in the exhaust air.
Oil identification
5.3 Connecting the air supply to the tool
---------------------------------------------------------------------------------------------------------------------------------------
The air hose can disconnect from the tool by itself and whip around uncontrollably.
Ú
Turn off the compressed air before connecting to the tool.
Ú
Securely connect the air hose to the tool.
Ú
Turn on the compressed air.
---------------------------------------------------------------------------------------------------------------------------------------
Parameter Description
Air Hose
Minimum inside diameter: 3/16" (4,7 mm)
Maximum length: 16.4' (5 m)
Working pressure range 58 to 101.5 psi (400 to 700 kPa)
Recommended: 90 psi (620 kPa)
Compressed air
Air quality according to ISO 8573-1, quality class 2.4.3
The compressed air must be clean and dry.
Part No. Packaged Designation Vendor
540397 1 Quart (0.94 liter) Airlube 10W/NR-420LB DR Fuchs Lubricants Co.
533485 1 US Gallon (3.78 liter) Airlube 10W/NR-420LB DR Fuchs Lubricants Co.