Warning: Disconnect the vortexer from power source before attempting any cleaning or
maintenance procedures.
After each use, wipe down the mixer with a soft cloth. Do not immerse the unit or pour liquids
over it as electrical shock may occur. Clean up any spills immediately taking the proper
precautions. If required, the shaking head may be removed. First, disconnect the vortexer from
the power source and then remove the combo-cup head by holding the housing securely while
pulling up on the head. The head may then be cleaned with a mild detergent. Be sure the head
is thoroughly dry before replacing it on the unit.
The motor and shaking mechanism in the Vortex Mixer require no routine maintenance or
lubrication.
Service
If you have a question about the Cleaver Vortex Mixer, contact Cleaver.
For service inquiries, contact
Cleaver’s Customer Service Department. Before returning any unit
for service, a Return Authorization (RA) number must first be obtained. Equipment sent in
without out prior authorization will be returned at the customer’s expense. When returning a unit
to Cleaver for service, it should be sent in the original packaging. If this is not possible, be sure
that the unit is sufficiently packed. Any damage resulting from improper packaging is the
responsibility of the customer. A written explanation should accompany the unit along with the
RA number.
Cleaver Scientific Ltd
41 Somers Road Industrial Estate
Rugby, Warwickshire
CV22 7DH
Tel: +44 (0) 1788 565 300
