under various loads. The metal baseplate and rubber feet provide additional stability and prevent
the unit from “walking” across the bench, even at maximum speed.
Read this manual thoroughly before attempting to operate the Vortex Mixer. All persons
operating this piece of equipment should review the Safety Precautions section of this manual.
Specifications
Speed Range
200-3400rpm (120V)
200-2850rpm (230V)
Operating Modes
Touch or Continuous
Ambient Operating Range
+4ºc to 65ºc
Dimensions(w x d x h)
14 x 16 x 12 cm
Weight
2.2 Kg
Electrical
120V, 60Hz, 0.6A
230V, 50Hz, 0.3A
Unpacking the Vortex Mixer
Upon receipt of the Vortex Mixer, examine the exterior carton for damages. In the event of
shipping damage, a claim must be filed with the transportation carrier within 10 days of receipt.
Save all packaging for inspection by the carrier.
Carefully unpack the unit and check for completeness. Included in the carton should be the
following:
Vortex mixer with cup head
Line cord
Instruction manual
Warranty card
If any of these items are missing, contact Cleaver immediately. Save the original packaging until
the unit has been shown to be operating properly.
Verify that the unit is rated for the proper voltage by checking electrical / serial no. label on the
back.
Installation
Locate the mixer on a level, stable surface near a grounded electrical outlet. The surface should
be clean and free of dust to ensure that the feet grip the surface firmly. Allow sufficient clearance
on all sides of the unit for proper ventilation.
With the power switch in the OFF position, plug the power cord into a grounded receptacle.
Operating the Vortex Mixer
All operating controls are located on the front panel. The power switch, located on the left side of
the panel, has three positions
– ON, OFF and TOUCH. When set to the TOUCH position, the
mixer is activated by depressing the mixing head. When pressure is released from the mixing
head, operation will stop. When set to the ON position, the mixer will operate continuously until
the switch is moved to either the OFF or TOUCH position.
