29/05/2019
Page 9
Replacing the Lamps:
In the course of time, the lamps will diminish in their output. It is therefore
recommended that all the lamps are changed at the same time, for uniform
efficiency. Please use a qualified safety engineer to replace and check the
operation of the lamps.
CAUTION: The lamps become very hot during use.
Make sure that the lamps have cooled down before removing them.
1.
Remove the mains lead from the back of the unit.
2.
To remove the lamps open both safety doors fully and using both
hands, twist the lamps one quarter turn. The lamps will then come out of
their sockets.
3.
To insert new lamps, place the lamps in their sockets and twist them
until they fix in position.
4.
Replace the mains lead and have the cabinet checked by a qualified
safety engineer.
There are no internal operator serviceable parts in this unit. If the power
should fail, the unit must be returned to the authorized distributor.
