29/05/2019
Page 7
Operating Instructions
Further information regarding setting up and running the UV Cabinet units
can be found at
Installation
1.
Check the cabinet and mains lead for any damage. DO NOT use if the
system shows any sign of damage.
2.
Place the cabinet on a flat surface. We recommend using a 68 x 54cm
safety tray.
3.
Connect the mains lead into the back of the cabinet and insert into an
earthed mains socket.
Operation
–
UV Sterilisation
1.
Place the objects to be sterilized inside the cabinet and close the side
doors.
PLEASE NOTE: the UV lights will not operate, when the doors are open.
2.
Switch the ‘Power’ switch to the ON position.
3.
Turn the timer to the required time. Twenty minutes is sufficient time to
sterilize most pieces of equipment. The UV lights will automatically turn
on and then switch off, after the set time.
Operation
–
White Light
1.
Switch the ‘Power’ switch to the ON position.
2.
Switch the ‘White Light’ switch to the ON position.
PLEASE NOTE: The white lights are not operated by the timer switch.
3.
The white lights will remain on when the doors are open.
