Section
Description
Page
Product Warranty Information.................................................................
2
®
A)
Identifying the
Scaleblaster
AG
Components......................................
3
B)
Tools and Materials Required..................................................................
3
C)
Site Survey...............................................................................................
4, 5
D)
Mounting the Power Box.........................................................................
6
E)
Installing the Signal Cable.......................................................................
6, 7
F)
Powering up the Control Box / Computer...............................................
8
G)
LCD Indicator Screen..............................................................................
8
Page 3
Table of Contents
®
A.) Identifying the ScaleBlaster AG Components
®
The ScaleBlaster AG unit includes the following components:
1)
One
ScaleBlaster AG
control box.
2)
One roll of 18 gauge (AG-150) or 12 gauge (AG-200, AG-300 &
AG-400) signal wire.
(length to be determined by specific application,
pipe size, and pipe material.)
3)
Long nylon cable ties, 5 or 3.
(5 for the AG-150)
or
(3 for the AG-200,
AG-300 & AG-400)
These ties aid in securing the cable to the pipe.
4)
Warranty Card
(along with this Installation & Operations Manual)
5)
Shipping Box
. Please save the foam inserts and shipping box, it is made
to protect the descaler during transport and is reusable in case the unit
ever needs servicing at the factory.
1
2
3
4
5
• Bullet Level
• Flat Screwdriver
• Screws & Anchors
• Voltage Meter
• Drill & Drill bits
• Phillips Screwdriver
• Utility Knife
• Wire Stripper
AG-100, AG-200, AG-300 or AG-400
B.) Tools and Materials Required
5 or 3
