GATHER REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the shelter. Additional tools and supports
may be needed depending on the structure, location,
and application.
•
Tape measure to measure pipe lengths
•
Fine Point Marker to mark locations on tubing
•
Electric Drill/Driver (Cordless preferred)
•
Adjustable wrench (or wrench set)
•
¼" Allen wrench
•
Scissors
•
Step ladder tall enough to safely work at the
height of your shelter
•
Two 30' pieces of rope
•
Gloves
•
Metal file
•
Duct tape
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin to assemble the
frame.
1. Unpack the contents of the shipment and place
where you can easily inventory the parts. See
Parts
Included in Shipment
if you are not familiar with a
part name.
2. Make sure you have all parts listed on the Bill of
Materials/Spec Sheet. If anything is missing or you
have questions, consult the figures and all shelter
diagrams for clarification or contact Customer
Service.
PARTS INCLUDED IN SHIPMENT
NOTE:
Illustrations are not to scale.
Swaged
End
Plain
End
Cross Connector
Brace Band
Short Tee
Zippered End Panel
Visit www.ClearSpan.com for additional products and customer assistance.
3 of 12
