CLEARSPAN
™
GARAGES & STORAGE SHEDS
14
Revision date: 06.11.08
INSTALL ROLL-UP CRANK ASSEMBLY
Gather the Parts:
• Pipe 1.315" x 75" Swaged
• Pipe 1.315" x 73.5" Plain
• Pipe 1.315" x 49.5" Plain
• Spin Handle
• Universal Joint
• Fabric Clips (4-6)
Assembly Procedure:
1. Assemble the roll-up door conduit by connecting the
75" swaged pipe to the 49.5" plain pipe, secure the
joint using a Tek screw, and tape over the Tek screw to
protect the end panel.
2. Insert the conduit assembly into the door pocket. When
installed correctly, the conduit is flush at one end of the
roll-up panel and will extend an inch or so beyond the
other end of the panel where the crank will be attached.
3. Secure the conduit to the panel using fabric clips as
shown below.
4. Attach the universal joint to the conduit in the pocket
using a Tek screw to secure the connection.
5. Attach the 73.5" plain pipe to the other end of the
universal joint using a Tek screw.
6. Add the spin handle to the 73.5" pipe and secure the
connection with a Tek screw.
The roll-up crank assembly has been completed and
shown below.
NOTE:
Do not open the door panel until the shelter is
completely assembled and anchored.
