Visit
www.ClearSpan.com
for additional products and customer assistance.
CLEARSPAN
™
SUNBURST POLY BUILDINGS
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the shelter. Additional tools and supports may be
needed depending on the structure, location, and
application.
Tape measure or measuring device
Variable speed drill and impact driver (cordless with
extra batteries works best)
Wrench, ratchet and socket (recommended)
1/4'' Allen wrench
Two ropes long enough to reach over the shelter
Hammers and gloves
Metal file and metal-cutting saw
Duct tape (supplied by customer)
Box cutter, utility knife, or scissors
Ladders, work platforms, and other machinery for lifting
designed to work safely at the height of the shelter
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin to assemble the shelter.
Unpack the contents of the shipment and place where
you can easily inventory the parts. Refer to the Bill of
Materials/Spec Sheets.
Verify that all parts listed on the Bill of Materials/Spec
Sheets are present. If anything is missing or you have
questions, consult the Pictorial Parts Guide and all
shelter diagrams for clarification, or contact Customer
Service.
NOTE:
At this time, you do not need to open the plastic
bags containing smaller parts such as fasteners or
washers.
QUICK START GUIDE
For a quick overview of this shelter, its components, and
connection details consult the Quick Start Guide at the
back of these instructions.
•
•
•
•
•
•
•
•
•
•
1.
2.
Space below is reserved for customer notes.
