manualshive.com logo in svg

ClearSpan 104900, Руководство пользователя

Поделиться
Скачать
ClearSpan 104900 Скачать руководство пользователя страница 11

11

CLEARSPAN

™

 CEDAR GREENHOUSES

Revision date: 06.18.09

7

INSIDE

VIEW

OUTSIDE

VIEW

Actual frame may differ from 
frame shown.  Back panel 
attachment is the same.

INSTALL FINISHING BACK PANEL

NOTE:

 Finishing back panel can be installed at either end of the greenhouse as desired depending on 

the position of the vertical wall.  For the purpose of these instructions, diagrams show greenhouse on the 
left of the vertical wall as seen from the front. 

Locate finishing back panel (#CG72124) and remove two (2) pre-installed 3" x 3" square brackets 

1.

from the side of the panel that will be toward the vertical wall. 

NOTE:

These 3" x 3" square brackets are used to secure the panel 

to the outside

 of the greenhouse.

 Install the back panel (#CG72124) as desired.  Secure panel using the two (2) pre-installed  3" x 3" 

2.

square brackets and 3/4" Phillips head screws on the inside as shown.

Using the two (2) 3" x 3" square brackets that were removed in Step 1, secure back panel to the 

3.

outside of the greenhouse as shown below.

Содержание 104900
























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды