manualshive.com logo in svg

ClearSpan 104596W, Руководство пользователя, Страница: 17 / 29

Поделиться
Скачать
ClearSpan 104596W Скачать руководство пользователя страница 17

CLEARSPAN

™

 FABRIC STRUCTURES

17

Revision date: 01.23.09

NOTE:

 Cut only the conduit pocket material. Do not cut 

the main cover material.

15. Insert a 103620B strap through the slit in the conduit 

pocket and around the conduit.

16. Insert both ends of the strap into a ratchet and slightly 

tighten.

17. Repeat the steps for the remaining ratchets. 

 

NOTE:

 If the strap binds up in the ratchet, cut the strap 

to make it shorter, and reinstall it into the ratchet.

18. Tighten the ratchets evenly along the back and front of 

the cover.

19. When the side ratchets are tight, assure the cover is 

centered and square on the frame.

20. Return to the end ratchets and tighten. 
21. Continue by installing the optional side panels. If you 

have not purchased the optional side panels, read the 

Care and Maintenance section near the front of this 

manual.

INSTALL MAIN COVER (continued)

INSTALL OPTIONAL PANELS (if equipped)

Side panels are available for the shelter and provide 

additional protection from the elements and other sources 

that could damage the contents of the shelter. 

 

To purchase the optional panels for your shelter, contact 

Customer Service at 1.800.245.9881 for additional 

information. If you do not have side panels to install, 

continue by reading the Shelter Care and Maintenance 

information near the front of this manual.

 

WARNING:

 To prevent serious personal injury or 

property damage, DO NOT install the cover on a windy 

or stormy day. For longer shelters, additional help is 

needed to lift and hold the panels in position.

OPTIONAL SIDE PANEL INSTALLATION

Optional side panels are attached to the frame using 

snugger balls in the manner illustrated. Secure the panels 

to the frame after installing the main cover. See cover photo 

of this guide for an example showing an installed optional 

side panel. 

(Additional purchase required.)

1.  Unpack panel and unfold completely. 

2.  Take one snugger ball tie, feed the stretch cord through 

a grommet, and secure the panel to the rafter legs and 

door header. Use one snugger ball for each grommet. 

(Side panel purchase includes snugger balls.) 

1

2

3

NOTE:

 A space will remain between the cover edge 

and the frame as shown in the diagrams.

3.  Repeat steps as needed to secure panel to the frame.

Optional 

Side Panel

Main cover not 

shown for clarity.

Ground Level

10. After the main cover is pulled into position, center it on 

the frame.

11.  At each end of the main cover, insert the pre-installed 

bonnet straps into the end ratchets attach to the end 

rafter legs.

12. Tighten the ratchets just enough to hold the cover on 

the frame.

13. Move to the main cover conduits and adjust the cover 

so that it is in the desired position and centered on 

the frame. Check the ratchet positions and adjust as 

needed. Install all ratchets at this time using the conduit 

and 103620B straps as guides if this is not done yet.

14. Cut a slit in the cover conduit pocket above each 

ratchet attached to the outside of the rafters. 

Содержание 104596W






























Отзывы:

Нет отзывов