ClearSounds CS-A55 Скачать руководство пользователя страница 15

14 – ENGLISH

15 – ENGLISH

telephone.  The  system  has  its  own  identifying  signal  created  by 

microcomputers in both the base unit and handset(s).

Noise

Electrical pulse noise is present in most homes at one time or another. 

This noise is most intense during electrical storms. certain kinds of 

electrical equipment such as light dimmers, fluorescent bulbs, motors 

and fans also generate noise pulses. Because radio frequencies are 

susceptible to these noise pulses, you may occasionally hear them 

in your handset. generally they are a minor annoyance and should 

not be interpreted as a defect in the system.

Range

Because frequency is used, the location of the base unit can affect 

the operating range. Try several locations in your home or office and 

pick the one that gives you the clearest signal to the handset.

Interference

Electronic circuits activate a relay to connect the cordless telephone 

to your telephone line. These electronic circuits operate in the radio 

frequency  spectrum.  While  several  protection  circuits  are  used 

to  prevent  unwanted  signals,  there  may  be  periods  when  these 

unwanted signals enter the base. You may hear clicks or hear the 

relay activate while you are not using the handset. if the interference 

occurs frequently, it can be minimized or eliminated by relocating 

the base.

NOTICE: 

This cordless telephone uses radio communication between 

the  handset  and  the  base  unit  and  may  not  ensure  privacy  of 

communication. other devices, including other cordless telephones, 

may interfere with the operation of this cordless telephone or cause 

noise during operation. Units not containing coded access may be 

accessed by other radio communication systems. cordless telephones 

must not cause interference to any licensed radio service.

General Cautionary Instructions

1  avoid dropping or knocking the unit.
2  Dust the unit regularly. Unplug your phone and wipe with a soft, 

slightly damp cloth to remove any dirt. To avoid damage, nEVEr 

use an abrasive or strong solvent to clean any part of the phone.

3  Keep the phone out of direct sunlight.
4  avoid placing the phone in extremely humid conditions.
5  avoid electric shock by keeping the phone away from water (i.e. 

bathroom, kitchen sink, pools, etc.)

If you experience trouble with your ClearSounds A55, please try the 

suggestions below before calling for help. For Customer service call 

cS-a55-TriLingual.indd   15

5/28/08   9:10:32 aM

Содержание CS-A55























Отзывы: