COLLABORATE Versa Lite CT
6
QSG-0091-001 v1.0 June 2020
Quick-Start Guide
BMA CTH
BMA CTH
Plenum shield (1)
600-to-625 mm
adapter (4)
COLLABORATE Versa USB
COLLABORATE Versa USB
USB Cable, 6
ft (1)
Setup
Step 1: Unpack
Verify that you have received all parts associated with each of the components.
Inspect your shipment carefully. If the shipment shows obvious signs of damage, retain original boxes and packing mate-
rial for inspection by the carrier, and contact them immediately. ClearOne is not responsible for product damage incurred
during shipment.
PoE Kit (Injector)
CAT6 cable,
Black, 25 ft. (1)
CAT6 cable,
Blue, 25 ft.
(1)
Power cord,
6 ft.
Power supply
Cables
CAT6 cable,
50 ft. (1)
Step 2: Install/Mount the Components
BMA CTH
On the BMA CTH back panel
• With speaker wire (not included),connect external speakers to the Phoenix Euroblock connectors (a)
• Move the Power Select sliding switch (c) to the right, towards the P-Link In connector (d)
If you plan to install both the plenum shield and seismic
cables:
Cut four 1” long slots diagonally in the plenum shielding
to match the points of seismic cable attachment.
If you do not plan to install the plenum shield and cables,
skip this step.
Prepare Plenum Shield for Seismic Cables
