ClearOne Audio Conferencing Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 39

ClearOne Audio Conferencing Скачать руководство пользователя страница 39

36 Technical Support:

800.283.5936

COMPLIANCE

FCC Part 15/ICES-003 Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC rules and Industry Canada ICES-003. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his/her own expense.
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must
accept any interference including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by ClearOne Communications could void the user’s authority to oper-
ate the equipment.

European Compliance

This equipment has been approved in accordance with Council Directive 1999/5/EC “Radio Equipment and
Telecommunications Equipment”
See the enclosed Declaration of Conformity (DOC) that is enclosed with the equipment for full details. Compliance of the
equipment with the Directive is attested by the application of the CE mark on the equipment.

Warranty

ClearOne Communications, Inc. (Manufacturer) warrants that this product is free of defects in both materials and work-
manship. For warranty information and coverage, refer to the ClearOne Website at

www.clearone.com

.

ClearOne Communications Inc.
5225 Wiley Post Way
Suite 500
Salt Lake City, Utah 84116

«
...
37
38
39

Содержание Audio Conferencing








































Отзывы:

Нет отзывов