manualshive.com logo in svg

ClearOne Audio Conferencing, Руководство администратора, Страница: 26 / 39

Поделиться
Скачать
ClearOne Audio Conferencing Скачать руководство пользователя страница 26

Chapter 2: Getting Started

     23

Configuration: Audio Settings Screen

Use the 

Configuration: Audio Settings

 screen (Figure 2.12) to configure the 

Voice Activity Detection (VAD)

 settings 

and to prioritize your preferred audio codecs.

• 

Enable VAD

: Click the check box to enable VAD or uncheck the box to disable it (VAD is enabled by default). Voice 

activity detection is a software application that allows a data network carrying voice traffic over the internet to detect 
the absence of audio and conserve bandwidth by preventing the transmission of “silent packets” over the network. 
VAD can also be used to forward idle noise characteristics to a remote IP telephone so that the listener will not think 
the line has gone dead when the speaker is not actively speaking. When VAD is enabled, 

VAD Noise Matching

 is 

active. When VAD is disabled, the audio sends a constant stream of audio data, even when there is silence.
If VAD is enabled and the active audio codec is G.723.1, silence (SID) packets will be sent when silence is de-
tected according to the description in the G.723.1 standard.
If VAD is enabled, G.711 is the active codec, and VAD Noise Matching is set to NONE, no audio is sent and no 
silence packets are sent when silence is detected.
If VAD is enabled, G.711 is the active codec, and VAD Noise Matching is set to LEVEL, single-byte CNG packets 
are sent with the current noise volume level when silence is detected.
If VAD is enabled, G.711 is the active codec, and VAD Noise Matching is set to G711A2, CNG packets are format-
ted according to G.711 Appendix II standard and the VAD LP Noise Order corresponds to the M coefficient in the 
Linear Prediction synthesis filter when silence is detected.

• 

VAD Noise Matching

: Click the radio button for the preferred type of VAD noise matching needed. VAD noise 

matching is the dB level of comfort noise that is transmitted that equals the floor noise in order to ensure that the 
receiver does not inadvertantly disconnect the phone during periods when conversation is non-existant or the unit 
does not immediately pick it up. Enter the value for the preferred VAD Noise LP order. VAD noise matching is en-
abled by default and LP order values range from 1 to 10, with 5 being the default.

• 

Preferred Audio Codecs

: Order the audio codecs in the preferred sequence, from most to least preferred. Select 

the codec to move then click on the 

Up

 or 

Down

 buttons to move it up/down the list. Repeat this for each codec to 

be re-ordered.

Figure 2.12

 - Configuration: Audio Settings Screen

Содержание Audio Conferencing








































Отзывы:

Нет отзывов