ClearFox CU-M, Быстрый старт, Страница: 7 / 16

ClearFox®Control Unit CU-M
7
7 C
ONNECTING TO
W
I
-F
I
The
ClearFox®Control Unit CU-M
can be operated and monitored via Wi-Fi. All
settings can be done comfortably in your browser (smartphone, tablet, PC).
- SSID: WWTP-Controller
- Wi-Fi password: 12345678
- IP address (must be entered into the browser address line (=where you’d type
www.google.com ): http://192.168.117.1/
o
Username: service
o
Password:
1111
(same as service menu PIN)
In case these parameters shall be changed, please refer to the Network Settings page:
Figure 2: Wi-Fi - Access Point settings
Please do not forget to push Apply Wi-Fi Settings (control unit restarts).
The
ClearFox®Control Unit CU-M
can run Wi-Fi in Access-Point (AP) and in Station Mod
e
(ST
)
- AP: Wi
- Fi hotspot without internet connection (intranet only)”
- ST: Connection to another Wi-Fi hotspot or router (e.g. your company Wi-Fi), often used
to connect the Sequetrol ® IoT to the public internet (e.g. for telemetry)
7.1 C
ONNECTING THE CONTROL UNIT TO THE INTERNET VIA
W
I
-F
I
(ST
MODE
)
The control unit can be run simultaneously in Access Point (AP) and Station (ST) mode.
- Access Point mode means, the control unit behaves as a “Wi -Fi hotspot ”. You can
connect with any device and view the internal webpages.
- Station mode means, the control unit connects to another Wi-Fi network (mostly with
internet access).