manualshive.com logo in svg

Clearfield FieldSmart FiberFlex 2000, Руководство по установке

Поделиться
Скачать
Clearfield FieldSmart FiberFlex 2000 Скачать руководство пользователя страница 84

FieldSmart

®

 FiberFlex 2000

Installation Manual 

 _________________________________________________________

Proprietary Information: Not for use or disclosure except by written agreement with Clearfield.

84

Checking Cable Connections

Check external cable connections at least once a year. External cables are any cable that enters the cabinet from 

 

the outside plant. 

• 

Visually inspect all cables for signs of physical damage. If damage is present, cables should be repaired or replaced 

 

per local practice.

•  Check all outside plant copper connections for complete and secure connection.

•  Ensure that all cable management accessories provide a clean appearance. Replace any fastening devices  

(i.e. cable ties) so that they include all cables being secured.

• 

Check all fiber optic connectors to ensure that they are securely fastened.

• 

Check all connections on the cabinet ground bar for a tight and secure fit.

•  Check all protector modules to ensure that all devices are securely seated.

•  Check all conduits to ensure that any material used to seal between the cable and the conduit is still present  

and providing a complete seal.

Содержание FieldSmart FiberFlex 2000










































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды