ClearCount SmartSponge Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 54

ClearCount SmartSponge Скачать руководство пользователя страница 7

Chapter 1: System Description - System Components

1-2

•

•

•

•

•

•

Count Out Bucket and Wand Components

The Count Out Bucket detects the RFID-tagged sponges and towels discarded into it during a surgical case.
The Handle and Casters contribute to the mobility of the SmartSponge System. The Handle is strategically
located to protect the Count In Scanner from forcefully hitting a wall, while also providing the user with a
comfortable means of maneuvering the system. The two rear casters are able to be locked in place to keep the
system stable during use. The Power Entry and On/Off Switch are located at the back of the system near the
floor. Insert the power cord into the Power Entry and then switch to On to power up the system. When not in
use, the SmartWand is mounted to the rear of the system by means of the Wand Holder; and the wand’s cord
is retained on the SmartWand Cord Wrap. See

Figure 1-2

.

Table 1-1 Count In Scanner Components

Component

Description

In-Scan Tray

The area on which sponge and towel packs
are to be placed when scanning them into a
surgical case.

SCAN IN button

This button activates the In-Scan Tray to
detect items introduced to the Scan In
Location.

Display

Displays information for the user to track
sponge counts throughout the surgical
procedure. Also displays various modes of
operation.

Scan In Location

The surface of the In-Scan Tray where
sponge and towel packs are scanned into the
surgical case.

Notes

•

The Count Out Bucket will not count items when the system is in SCANNING IN
mode.

«
...
5
6
7
8
9
...
»

Содержание SmartSponge























































Отзывы:

Нет отзывов