ClearCount SmartSponge Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 54

ClearCount SmartSponge Скачать руководство пользователя страница 4

ii

•

•

•

•

•

•

•

Tags may become damaged by surgical lasers. Do not apply a surgical laser directly to a tag.
The loss of tag function may result.

•

Due to possible interference, the system should be separated by at least 1 meter from an
active Electrosurgical Unit (ESU). The system should be checked for normal operation to
ensure there is no interference present.

•

Do not dispose of sponges from a previous surgical case into the Count Out Bucket.
Sponge counts may not reconcile properly.

•

No part of the ClearCount SmartSponge System is user serviceable. The system contains
no user replaceable fuses. All Service is to be performed by trained personnel.

Conventions Used

Warning!

A warning is a statement that identifies conditions or actions that could result in personal
injury or loss of life.

Caution!

A caution is a statement that identifies conditions or actions that could result in damage to
the system.

Notes

A note is an advisory comment or recommendation regarding practices or procedures.

«
...
2
3
4
5
6
...
»

Содержание SmartSponge























































Отзывы:

Нет отзывов