manualshive.com logo in svg

ClearCount SmartSponge, Руководство по эксплуатационным процедурам, Страница: 42 / 54

Поделиться
Скачать
ClearCount SmartSponge Скачать руководство пользователя страница 42

4-5

 

Chapter 4: Troubleshooting

 - 

System Alerts

• 

• 

• 

•

•

•

Multiple Packs Detected - Remove and Scan One Pack at a Time

Pack Already Scanned

Change Bag - Bucket Limit Has Been Exceeded - Remove Sponges to Continue

Bag Overflow Warning - Bucket Limit Has Been Exceeded - Remove Sponges to Continue

 

Wand Disconnected

CAUSE: 

The system is unable to scan in multiple packs 
at the same time. 

ACTION: 

Ensure that only one pack of sponges is being placed on 
the In-Scan Tray at a time. 

CAUSE: 

The sponge pack has already been counted.

ACTION: 

The sponge pack is ready for use - continue with system 
setup or operation.

CAUSE: 

There are over 

50

 sponges in the Count Out 

Bucket.

ACTION: 

Remove sponges or discard the full bag and replace with 
a new liner - sponge counts will not change. 

CAUSE: 

There are over 

70

 sponges in the Count Out 

Bucket. 

ACTION: 

Remove sponges or discard the full bag and replace with 
a new liner - sponge counts will not change. Alert will 
remain until less than 

70

 sponges are present in the 

Count Out Bucket.

CAUSE: 

The SmartWand is not connected.

ACTION: 

Ensure that the SmartWand is properly plugged into the 
system. 

Содержание SmartSponge























































Отзывы:

Нет отзывов