Clearaudio Statement TT1, Руководство пользователя

Страница: 10 / 24

User manual
Page 10 © clearaudio electronic GmbH, 2022-01
Now place the aligning gauge on top of the two round bases (see picture 6).
Rotate the round bases until all four pins on the bottom of the alignment gauge fit into the threads
machined into the bases.
Pic. 6: Placing the alignment gauge
Pic. 7: Tightening the mounting bolts
While holding the alignment gauge in this position, tighten the two bolts with the hex wrench
provided (Pic. 7).
Attention:
Any misalignment at this stage will cause problems when positioning the
TT1
tonearm
After the round bases have been fixed, the alignment gauge can be removed.