User manual
Page 12
© clearaudio electronic GmbH, 2022-01
Pic. 11: Pre-mounted bearing carriage and glass tube with transportation lock
6. Mounting the armwand
Please take great care in undertaking the following steps.
Remove the rubber band which is used as transportation lock.
Afterwards loosen the screws from the aluminum block and remove the second transportation lock.
Move the tonearm to the playback position and press the cable into the holders provided on the
back of the tonearm. Make sure that the cable has enough latitude when the tonearm is moved
back and forth.
Guide the tonearm tube between the track and the eccentric shaft (green arrow, Fig. 12).
Now you can mount the armwand on the carriage using the aluminum clamping block and the two
screws. Ground the tonearm using the screw as seen in picture 12.
We recommend tightening the screws of the aluminum block only slightly, as the armwand needs to
be movable for the subsequent adjustments.
Pic. 12: Mounting of the armwand
Pic. 13: Mounted armwand
Содержание Statement TT1
Страница 1: ...User manual clearaudio electronic GmbH 2022 01 Made in Germany Statement TT1 Pic similar Pic similar...
Страница 21: ...User manual Made in Germany Page 21...
Страница 22: ...User manual Page 22 clearaudio electronic GmbH 2022 01...
Страница 23: ...User manual Made in Germany Page 23...