User manual / Bedienungsanleitung
4
© clearaudio
electronic GmbH, 2021-03
1. Contents
Please check all contents of your package:
1.
smart power 12V (
with hard wired power cord, length 160cm)
2. 19V wall mount power supply
3. User manual
4. Warranty card / Quality card
2. Getting started
The
Clearaudio
smart power 12V
is delivered in custom-designed packaging. Please keep this
packaging to ensure safe transportation if needed.
Unpack the unit and place it at its desired location.
Connect the
smart power 12V
to the mains power supply with the supplied 19V wall mount power
supply. Then connect your turntable to the
smart power 12V
using the attached power cord, instead
of the usual power supply.
Note: Never connect the 19V power supply direct to your concept series turntable.
Serious damage can occur.
Before using
smart power 12V
it is important to fully charge internal battery to bring it
to the optimum operating condition ( see page 5, point 3.3, “Charging mode”) .
To switch the
smart power 12V
on, use the switch on the rear side of the unit.
The
smart power 12V
is now in the output/off mode, the LED ring of the button on the front will
brighten up and vanish after a few seconds.
Press the button shortly, to activate the unit and to supply the turntable with power.
