Ambient
User manual
Seite 14
clearaudio electronic GmbH 2008
Attach the clearaudio Turbo Weight on the end of the tonearm (1). Set tracking force
using the clearaudio Exact stylus preassure gauge (see cartridge instructions for
recommended tracking force renge). Adjusting tracking force is accomplished by moving
the weight towards or away from the pivot point on the shaft (to 1).
Note:
When
tightening the counter-weight, insure that the weight is perfectly vertical otherwise this
may affect your cartridges azimuth settings.
Feed the anti-skate weight through the anti-skate support wand and secure it to the
threaded shaft at the top of the tonearm bell (to 3).
Note:
Attaching the string to the
position closes to the pivot point is equal to approx 0.5 gramms of anti-skate. Each
additional 1/8” out on the shaft will give you another 0.5 gramms of anti-skate force with
a maximum of 3.0 gramms if affixed to the end of the shaft.
(
green arrow = lesser
antiskating
/
red arrow = more antiskating
)
.
2
3
to 1
to 3
to 2
1
Pic. 13:
Mounting the tonearm
