background image

P I C - 4 7 0 4 ,   M A - 7 0 4   &   A X - 7 0 4   I F B   S Y S T E M

1 - 3

The connectors on the MA-704, AX-704, and PIC-4704 are arranged for 
convenient interconnection as a stand-alone system. However, all the units’ 
electrical characteristics are identical to those of the integrated IFB systems on 
our standard broadcast intercom line. With suitable connector adaptors, both 
types of units can be mixed in a system.

OPERATION

The system is operated by engaging the desired cue buttons on the access 
stations. A control voltage on the IFB line causes the PIC-4704 to dip the 
program feed to that channel so that the cues given are understandable. (At an 
optional split-feed receiver, the program is dipped only in the cue side; the other 
side has continuous program with no cue.) 

1. Press the IFB button on the access station corresponding to the talent 

position(s) you wish to cue, then speak into the MA-704’s microphone. 

2. Press the MA-704’s ‘All’

 

button and you simultaneously activate every IFB 

line, including those on any accompanying AX-704 units. 

The control voltage also causes the corresponding buttons at all other access 
locations to change in color from blue to amber, indicating which channels are in 
use. 

Содержание Encore AX-704































Отзывы: