CleanStar VBP-BATT30, Инструкция по эксплуатации

Страница: 6 / 17

ASSEMBLING YOUR VACUUM
INSERT THE HEPA DUST BAG
Note: This unit can be used with the cloth bag alone, however it must be cleaned after
every use if there is No Disposable dust bag installed.
Important: Do not use the vacuum without all filters, cloth bag, and with or without
Disposable dust bag in place.
1. Close the power with switch and remove the flexible hose.
2. To open the canister lid press on the canister lid tabs on each side of the unit and lift
canister lid. (Fig.1)
3. Pull the tab on the Disposable dust bag holder out slightly and flip upwards.(Fig 2)
4. Holding the Disposable dust bag in your hand, place it firmly between the slots in the
bag holder. (Fig 2)
5. The cardboard face of the new bag should rest securely in the dust bag cover
guide.(Fig 3)
6. Ensure that the cloth bag is in place. (Fig. 4)
7. Flip the Disposable bag holder over, pressing the tab on the bag holder until it clicks
then replace the canister lid.
8. The canister lid can be replaced on the unit with the hose opening on the right or left,
as per your preference. (Fig 5)