CleanStar VBP-BATT30, Инструкция по эксплуатации

Страница: 15 / 17

happens, recharging of the battery is required. It is not necessary to drain the battery pack
completely before recharging.
If the charger’s light is not lit at any point during the charging process, remove the battery
pack from the charger to avoid damaging the product. DO NOT insert another battery.
Contact your place of purchase with any issues.
BATTERY PROTECTION FEATURE
The 37-volt Lithium Polymer batteries are designed with features that protect the Lithium
Polymer cells and maximize battery life. When the battery has reached its minimum
voltage level the electronics will shut off the battery. Once the battery shuts off, it must be
recharged.
PREPARING BATTERY PACK FOR CHARGING
1. Plug the charger’s power cord into the charger (Fig 21)
2. Turn off the power switch. Confirm the switch is in the
“O” position.
3. Unlock the battery pack by turning knob clockwise and take the battery pack out from
the vacuum.(Fig 22)
4. Plug the round connector on the charger’s cord into the battery pack. (Fig 23)
5. Plug the charger’s power cord into 240V wall outlet (Fig 24)
6. The indicator light will turn red when charging and turn Green when full charged. The
Battery pack may require approximately 4 hours to fully charge.
Note: Battery pack may get warm while charging.
Fig 21
indicate light